Filter
Top Products
6 Matrox Graphics Card – User Guide
To use a dual-monitor cable to connect one
or two analog monitors, connect it to your
card and to your analog monitor cables. If
you’re connecting only one monitor, use the
main connector (labeled
1
) of your dual-
monitor cable.
Note:
To connect a
digital
monitor (a
monitor that uses digital input, usually a flat
panel monitor) to your Matrox product,
your monitor must have a DVI connector.
If you have an
analog
monitor (a monitor
that uses analog input) with a DVI
connector and you want to connect it to an
HD-15 connector, you’ll need a separate
adapter. If this adapter isn’t included with your monitor, contact your monitor vendor.
Some monitors with DVI connectors support both digital and analog input. If you’re using
one of these monitors with your Matrox product, make sure it’s configured to use the correct
type of input. For more information, see your monitor documentation.
Note:
Whenever you change your connection setup, make sure you’re using the correct
connectors and that all connectors are properly fastened.
Whenever you restart your computer, make sure your monitors are already turned on.
Otherwise, the software may not be able to properly detect your monitors.
Note:
If a TV output adapter is included with your Matrox
product, you can use this adapter to connect a TV or video
recorder to your Matrox product. The adapter connects to the
secondary connector on your graphics card or to the connector
labeled
2
on your dual-monitor cable. For more information,
see “TV output” in the online version of this guide.
Main
connector (1)
Secondary
connector (2)
Dual-monitor
cable
HD-15 connector (analog)
DVI connector
(digital)
DVI connector
(analog/digital)
TV output adapter