Measurement Specialties PCI-DAS64/M2/16 Computer Hardware User Manual


 
PCI-DAS64/M2/16 User's Guide Specifications
Pacer
Table 16. Pacer specifications
ADC pacer type ASIC
Configuration One down counter, 24 bits (1 scan interval, 1 sample interval)
ADC pacer source 40 MHz internal source
ADC pacer gate Internally controlled by software/hardware trigger.
ADC pacer out ADC pacer clock, available at user connector (A/D PACER OUT)
DAC pacer type ASIC
Configuration One down counter, 24 bits (1 scan interval, 1 sample interval)
DAC pacer source 40 MHz or 100 kHz internal source. Software-selectable.
DAC pacer gate Internally controlled by software/hardware trigger.
DAC pacer out
DAC pacer clock. Available at user connector (SSH OUT / D/A PACER OUT). This
pin is software selectable as SSH OUT (default) or D/A PACER OUT.
Internal pacer crystal oscillator 40 MHz
Frequency accuracy 50 ppm
Power consumption
Table 17. Power specifications
+5 V 2.9 A typical, 3.3 A max
+12 V 10 mA max.
Environmental
Table 18. Environmental specifications
Operating temperature range 0 to 50 °C
Storage temperature range -40 to 100 °C
Humidity 0 to 95% non-condensing
Mechanical
Table 19. Mechanical specifications
Card dimensions 315 mm (L) x 100.6 mm (W) x 16 mm (H)
Main connector and pin out
Table 20. Main connector and pinout specifications
Parameter Specification
Connector type Shielded SCSI 100-pin D-type
C100HD50-x, unshielded ribbon cable. x = 3 or 6 feet. Compatible cables
C100MMS-x, shielded round cable. x = 1, 2, or 3 meters.
Compatible accessory products
using the C100HD50-x cable
CIO-MINI50 (two required)
SCB-50
Compatible accessory products
using the C100MMS-x cable
CIO-TERM100
SCB-100
6-10