Filter
Top Products
11
ASSEMBLING THE STANDS
There are 2 options for assembling the stand. The first option allows the stand to
be self-supporting and moved freely or placed anywhere on the countertop. The
second option is used if the stand will be bolted/hard-mounted to the countertop.
Stand Option 1: Self-supported
For use with kit #46-46128
Step 1
Slide the apron (MLPN 50-50440)
over the stand (
MLPN 36-00454).
Step 2
Position the stand so it sits under
the tab on the apron. Then secure
the apron to the stand using the
M3 x 6 mm screws
(
MLPN 18-18670) and the #5
washers (
MLPN 18-18671) provided.
Stand Option 2: Hard-mounted to countertop
For use with kit #46-46351
Step 1
Drill four #39 holes in the countertop.
Step 2
Secure the base (MLPN 36-36080)
to the countertop with the four
#8 wood screws (
MLPN 18-18057) provided.
Continued on next page
Stand
Apron
A
pron
Stand
M3 x 6 mm
Scre
w
#5 Washer
Tab
Base
#8 Wood
Screw
2.00 in
2.00 in