Filter
Top Products
33
DEFAULT SETTINGS
Many functions of the scanner can be “programmed” – that is, enabled or
disabled. The scanner is shipped from the factory programmed to a set of
default conditions. The default parameter of the scanner has an asterisk (*) in
the charts on the following pages. If an asterisk is not in the default column then
the default setting is OFF or DISABLED. Every communication does not support
every parameter. If the communication supports a parameter listed in the charts
on the following pages, a check mark will appear.
PARAMETER DEFAULT OCIA RS-232
LIGHT
PEN
IBM
46XX
KBW
LASER
EMULATION
Normal Scan Mode *
99999 9
Continuous Scan Mode
99999 9
Blinky Scan
99999 9
Continuous Blinky Scan
99999 9
Custom (one shot) Scan
99999 9
Long-Range In-Stand *
99999 9
Short-Range In-Stand
99999 9
Long-Range Out-of-Stand *
99999 9
Short-Range Out-of-Stand
99999 9
CodeGate Active In-Stand
99999 9
CodeGate Inactive In-Stand *
99999 9
CodeGate Active
Out-of Stand
*
99999 9
CodeGate Inactive
Out-of Stand
99999 9
UPC/EAN *
99999 9
Code 128 *
99999 9
Code 93 *
99999 9
Codabar *
99999 9
Interleaved 2 of 5 (ITF) *
99999 9
MOD 10 check on ITF
99999 9
Code 11
99999 9
Code 39 *
99999 9
Full ASCII Code 39
99999 9