Filter
Top Products
Installation and User Manual
A wide range of optional cards will allow your UPS to talk to nearly all equipment management systems, making
integration faster and easier. All these cards can plug directly into the UPS, saving time and money on your next
UPS project. (Meta UPS Card and U-Talk /Basic Acquisition Cards are used exclusively with Multi-slot.)
Dual U-Talk/Basic Card (66060)
Provides two communications ports that may be configured
for serial link or AS/400 type dry contacts.
ModBus Card (66061)
Interface your UPS with a Building Management System.
Dual COM Ports Card (66066)
This card has two independent RS232 communication ports
on which it can be connected. One for connecting monitoring software
(included) and one for remote control panel UPS control.
USB Card (66067)
Take advantage of the latest and fastest communication
protocol for Microsoft Windows 2000/XP or Mac OSX.
Dual Volt Free Contacts (66068)
The two ports are used to supply UPS status information
Card for AS/400 or one port can be used as a Remote Power Off (REPO) port.
Alarm Relay Card (66069)
Six output relays show UPS status and two status inputs are
used with the Galaxy 3000 UPS.
XML-Web Card (66073)
XML-Web Card acts as a web page for your UPS information.
Used along with XML-Client
TM
software, up to 50 servers or workstations will
be protected and can monitor the UPS with a simple web browser.
Security is handled with the SSL protocol, used by many websites to
safeguard sensitive password information.
SNMP-Web Card (66074)
The SNMP/Web 10/100BT communications card is
both an SNMP agent and an HTTP/Web server. Therefore, it
enables UPS supervision from any Network Monitoring
System using SNMP traps or simply from any web
browser (Internet Explorer, Netscape Navigator, etc.)
Orderly system shutdown of up to 32 protected servers can
be established using MGE’s Solution-Pac/WAN software
suite.
Installation 2 — 1186-86000-00 A01