Filter
Top Products
98
9.3 Get Setting Values – “get” Command
“get” command is used to get the setting values of this print server. The
format of “get” command is as following:
get argument
Then the argument value will be displayed after the command. For
example, if I want to get IP address of the print server, I type “get ip”
command and the IP value “IP_ADDR=’192.168.2.2’” is displayed:
admin# get ip
IP_ADDR=’192.168.2.2’
If you enter “get” only, the system will list all available arguments of “get”
command.
The following table lists all the arguments whose value can be got by “get”
command:
Argument Description Example
psname Print server name admin# get psname
PORT1_PS=’PS254896’
password Login password admin# get password
USER_PASSWORD=’1234’
username Login username admin# get username
USER_NAME=’admin’
wlfunc Wireless LAN
function is enabled or
disabled
0: disabled
1: enabled
2: auto
admin# get wlfunc
WIRELESS_FUNCTION=2