Filter
Top Products
83
2. If “Auto” is selected, the print server can automatically decide to
enable or disable the wireless function. The print server only can work
in ether Ethernet or wireless LAN mode. It cannot work in both
Ethernet and wireless LAN mode at the same time. When the print
server starts up, it will auto-detect if the LAN port is connected to an
active network by an Ethernet cable.
(1) If the print server is connected to an active network by Ethernet
cable when starting up, the print server will run in Ethernet
mode.
(2) If the print server is not connected to an active network by
Ethernet cable when starting up, the print server will run in
wireless LAN mode.
(3) The print server default is in “Auto” mode.
Mode:
Mode is the operation mode of wireless station. You can choose ether “Ad
Hoc” or “Infrastructure” mode. If you do not have any access point and
want to use peer-to-peer connection, you have to choose “Ad Hoc” mode.
If you have an access point as the wireless LAN infrastructure, you have
to choose “Infrastructure” mode.
ESSID:
ESSID is the unique name identified by in a wireless LAN. The ID
prevents the unintentional merging of two co-located WLANs. Please
make sure that the ESSID of all stations and access points in the same
WLAN network are the same.
Channel:
Channel Number is the channel number of your wireless LAN. Please
make sure that the channel number of all stations and access points in the
same WLAN network are the same.