Filter
Top Products
Printed Report
75
4
Printed Report
Memory Storage Report
This report is printed after an original
is stored in memory. It helps you re-
view the contents and the destina-
tions of stored originals. Even if the
machine is set up not to print this re-
port, it is still printed if an original
could not be stored.
Note
❒ You can turn this report on and off.
See p.147 “Changing the User Pa-
rameters” (switch 03, bit 2).
❒ You can select whether to include
part of the original image on the re-
port. See p.147 “Changing the User
Parameters” (switch 04, bit 7).
❒ If you use Parallel Memory Trans-
mission, the Memory Storage Re-
port is not printed.
Transmission Result Report
(Memory Transmission)
This report is printed when a Memo-
ry Transmission is completed, so you
can check the result of the transmis-
sion. If two or more destinations are
specified, this report is printed after
the fax message has been sent to all
the destinations. If the machine is set
up not to print this report and the fax
message could not be successfully
transmitted, a Communication Fail-
ure Report is printed. See p.75 “Com-
munication Failure Report”.
Note
❒ You can turn this function on or off
with the User Parameters. See
p.147 “Changing the User Parame-
ters” (switch 03, bit 0).
❒ You can select whether to include
part of the original image on the re-
port. See p.147 “Changing the User
Parameters” (switch 04, bit 7).
❒ The Page column gives the total
number of pages. The Not Sent col-
umn gives the number of pages
that could not be sent successfully.
Communication Failure Report
This report is only printed if the
Transmission Result Report is turned
off and a message could not be suc-
cessfully transmitted with Memory
Transmission. Use it to keep a record
of failed transmissions so you can
send them again.
Note
❒ You can select whether to include
part of the original image on the re-
port. See p.147 “Changing the User
Parameters” (switch 04, bit 7).
❒ The Page column gives the total
number of pages. The Not Sent col-
umn gives the number of pages
that could not be sent successfully.