Filter
Top Products
CHAPTER 2
INSTALLATION
INSTRUCTIONS
This chapter gives step-by-step instructions for installing RAMCard.
We recommend that you read all the instructions first to acquaint
yourself with the overall procedure. Then, perform each step with care
exactly as described.
Opening Your Apple II
Since RAMCard is to be installed inside your Apple II, you must
remove the cover of your Apple before you start.
CAUTION
\
It is dangerous to open any electrical or electronic
device with the power turned on. Additionally, at-
tempting to insert or remove peripheral cards while
your Apple’s power is on will probably destroy the
cards and other parts of your APple II. Be sure to
turn off the power to your Apple II before perform-
ing any of the steps in this procedure.
1. Turn off the power.
The POWER light on the lower left corner of the keyboard should
not be illuminated.
9