Filter
Top Products
2. Remove the cover from your Apple II.
Pull up on the rear edge of the cover until the fasteners at the rear
corners pop apart. Do this only firmly enough to separate the fas-
teners, then stop. Do not pull up any further.
3. Slide the cover backward.
Slide the cover away from the keyboard towards the rear of your
Apple II. The interior of your Apple II should now be exposed.
Removing A Chip
Before you can install RAMCard, you must remove one of the RAM
chips inside your Apple II. Later, you will insert the plug on the RAM-
Card connector cable into the space where the chip is now.
1. Look into your Apple II.
Familiarize yourself with the inside.
power supply cover edge connector slot
memory chip to be removed RAM chips located
in this square
The Interior of an Apple II
10