Filter
Top Products
If the plug does not slide into the holes easily, remove it, reposition
the pins, then app]y gentle pressure until the plug is seated. A very
slight wiggle may be used to help seat the plug. But, any lateral
movement may damage a pin so avoid wiggling if you can. If you
must wiggle the plug to seat it fully, be sure the pins are lined up
properly first, then wiggle only very slightly and very slowly.
Inserting RAMCard
1.Position RAMCard over Slot 0.
Hold RAMCard so that it can be inserted in Slot 0 without twisting
the cable. If RAMCard cannot be inserted without twisting the
connector cable, the plug was inserted backwards. Remove the plug
and reinsert it So that the connector cable will not be twisted when
RAMCard is inserted.
2.Position the edge-connector into Slot 0.
Inserting RAMCard into Slot 0
15