Filter
Top Products
28
Using BIOS
PXP43 Motherboard User’s Guide
Limit CPUID MaxVal (Disabled)
Advanced Setup
This page sets up more advanced information about your system. Handle this page
with caution. Any changes can affect the operation of your computer.
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
Advanced Setup
TM Status TM1/TM2
Limit CPUID MaxVal Disabled
Enhanced Halt (C1E) Enabled
Intel XD Bit Disabled
Intel EIST Disabled
Intel Virtualization Technol Enabled
Quick Power on Self Test Enabled
Boot Up Numlock Status ON
APIC Mode Enabled
1st Boot Device CD/DVD
2nd Boot Device Hard Drive
3rd Boot Device Remvable Dev.
Boot Other Device Yes
For the processor its
CPUID belows 0F41h.
TM2 only can be enbale
under below setting.
1. Freq.>=3.6GHz FSB800
2. Freq.>=2.8GHz FSB533
Help Item
Thermal Management Enabled
: Move
F10: Save ESC: Exit
Enter : Select
+/-/: Value
F9: Load Default settings
F1: General Help
mn
< >
Enhanced Halt (C1E) (Enabled)
Intel XD Bit (Disabled)
Intel EIST (Disabled)
Thermal Management (Enabled)
This item displays CPU temperature and enables you to set a safe temperature to
Prescott CPU.
TM Status (TM1/TM2)
This item displays CPU Monitor status.
Use this item to enable or disable the Max CPU ID value limit. When suppports
Prescott and LGA775 CPUs, enables this to prevent the system from “rebooting”
when trying to install Windows NT 4.0.
This item enables or disables enhanced halt.
This item enables or disables the Intel XD Bit technology.
This item allows users to enable or disable the EIST (Enhanced Intel Speedstep
Technology) function. This item shows only if the CPU supports EIST.
Quick Power on Self Test (Enabled)
Intel Virtualization Technol (Enabled)
When enabled, a VMM can utilize the additional hardware capabilities provided by
Vandor Pool Technology.
Enable this item to shorten the power on testing (POST) and have your system start
up faster. You might like to enable this item after you are confident that your system
hardware is operating smoothly.