Milan Technology MIL-SM800P Switch User Manual


 
61
5-4-5-1. Aggregator Setting
System Priority: A value used to identify the active LACP. The switch with
the lowest value has the highest priority and is selected as the active LACP.
1. Group ID: To create a trunk across two or more ports, choose the
"Group ID" and click "Get".
2. LACP: If enabled, the group supports LACP. If disabled, the group is a
local static trunking group between two switches. All ports support LACP
dynamic trunking group. If connecting to another device that also
supports LACP, the LACP dynamic trunking group will be created
automatically.
3. Work ports: Defines the maximum number of ports that can be
aggregated at the same time. If the group is an LACP static trunking
group, the exceed ports is standby and able to aggregate if work ports
fail. If the group is a local static trunking group, the number must be the
same as group ports.
4. Select the ports to join the trunking group.
5. If LACP is enabled, you can configure LACP Active/Passive status for
each port.
6. Click Apply.