Milan Technology MIL-SME801GLX Switch User Manual


 
137
5-4-12. 802.1x
You must enable the 802.1x protocol on the miscellaneous section of the
Switch Settings menu for changes in this section to take effect. This section
deals with the system level and per port configurations to support the IEEE
802.1x authentication and authorization protocol.
5-4-12-1. System Configuration
Radius Server IP:
Set the Radius Server IP address.
Server Port:
Set the UDP destination port for authentication requests to the
specified Radius Server.
Accounting Port:
Set the UDP destination port for accounting requests to
the specified Radius Server.
Shared Key:
Set an encryption key for use during authentication sessions
with the specified radius server. This key must match the encryption key used
on the Radius Server.
NAS, Identifier:
Set the identifier for the radius client.