Milan Technology MIL-SME801GLX Switch User Manual


 
30
4-3-2. Port Configuration
This page can change every port status.
Press the
TAB
key to select each item and press the
SPACE
key to change
the configuration of each item.
State:
Displays current port status. The port can be set to disable or enable
mode. If the port setting is set to disable, the port will not receive or transmit
any packets.
Negotiation:
Displays current auto negotiation setting status of each port.
Speed/Duplex:
Each port can be set for link speed and duplex mode.
FC / BP:
User can set flow control function to enable or disable. FC (Flow
control for full duplex link mode), BP (Backpressure for half duplex mode).
Bandwidth In/ Out:
User can determine packet transmission rate control for
each port. Per level is 100Kbps. Individual control method of TX and RX is
supported.
Priority:
User cab set each port to high or low priority.
Security:
User can enable or disable port security function.