Milan Technology MIL-SME801GLX Switch User Manual


 
39
4-3-5-2. Create VLAN Group
Create Port-Based VLAN
Select
<Edit>
to create a port-based VLAN and add member or nonmember
ports to it.
1.
VLAN Name:
Type a name for the new VLAN using 15 alphanumeric
characters and no spaces.
2.
Group ID:
Type the VLAN group ID. The group ID range is 1to 4094.
3.
Member:
Press the
Space
key to choose VLAN member type. There are
two selections:
Member: The port is member port.
NO: The port is NOT member port.
4. Press
“ESC”
to go back to the action menu line.
5. Select
<Save>
to save all configured values.
NOTE:
If the trunk groups exist, it will be displayed (ex: Trunk1, Trunk2…)
after port 9. The user can select if it is the member of the VLAN or not.