Filter
Top Products
58
4-4-1-2. System Configuration
All devices in the spanning tree instance will utilize the same values as the
root bridge to ensure consistency throughout the network. If this device
becomes the root bridge, then the other switches in the STP instance will
utilize its values.
Spanning tree information for the Root Bridge on the left is for display only.
Configure new values for the STP parameter on the right.
You must enable STP function before selecting the configuration menu.
Priority:
The value used to identify the root bridge. The bridge with the lowest
value has the highest priority and is selected as the root. Enter a number 1
through 65535.