Milan Technology MIL-SME801GLX Switch User Manual


 
83
4-5-1. Factory Default
Use this menu to restore all factory default settings. Pressing
y
will reset the
switch configuration settings to their factory defaults. Rebooting the switch is
necessary for the new configurations to take effect.
y:
Resets the switch to the factory default configuration. The software version
that the switch will be reset to can be found on the “System Information” menu
under the main menu “Status and Counters”.
N:
Returns to the previous menu.
Warning:
The unit must be allowed to complete restart process to restore
the defaults without an interruption. Manually powering off the system
before the process has been completed may result in corrupted memory and
may cause the unit to not start or come up in an unknown state.
4-5-2. System Reboot
Reboots the switch to enable items that have been configured.