Milan Technology MIL-SM801P Switch User Manual


 
7
Attaching Rubber Feet
A. Make sure the mounting surface on the bottom of the switch is
grease and dust free.
B. Remove adhesive backing from the rubber feet.
C. Apply the rubber feet to each corner on the bottom of the switch.
These footpads can protect the switch from shock and vibration.
Figure 2-6. Attaching Rubber Feet to each corner on the bottom of the
switch
Power On
Connect the power cord to the power socket on the rear panel of the
switch. Connect the other end of the cord to an appropriate power
outlet. Check the power indicator on the front panel to see if power is
properly supplied. The internal power supply works with AC in the
voltage range 100-240VAC, frequency 50~60Hz. Country specific
power cords are available for the unit.