Milan Technology MIL-SM801P Switch User Manual


 
71
Information about the current spanning tree status is displayed in this table.
The priority and path cost can be configured for each port. Click the Apply button
to modify the configuration.
Description
Port Priority
A change to the Port Priority affects which port will be the root port. The lowest
number has the highest priority. The range is 0-255 and the default setting for all
ports is 128. If you change the value, you must reboot the switch.
Path Cost
Path Cost specifies the path cost of the port that the switch uses to determine
which ports are the forwarding ports. The lowest number becomes the
forwarding port. The range is 1-65535 and the default value is based on
IEEE802.1D
10Mb/s = 50-600 100Mb/s = 10-60
If you change the value, you must reboot the switch.