Milan Technology MIL-SM801P Switch User Manual


 
80
Cabling
RJ-45 ports: Use unshielded twisted-pair (UTP) or shielded twisted-pair
(STP) cable for RJ-45 connections: 100 Category 3, 4 or 5 cable for
10Mbps connections or 100 Category 5 cable for 100Mbps
connections. Be sure that the length of any twisted-pair connection
does not exceed 100 meters (328 feet).
100BASE-FX fiber port: Multi-mode fiber connector types must use
50/125 or 62.5/125 µm multi-mode fiber cable. Two devices may be
connected over a 2 kilometer distance. Single-mode fiber connector
types must use 9/125 µm single-mode fiber cable. Two devices may be
connected over a15 to 60 kilometer distance in full duplex operation in
single-mode.
1000BASE-SX fiber port: Multi-mode fiber connector types must use
50/125 µm multi-mode fiber cable for 500 meters or 62.5/125 µm multi-
mode fiber cable for 220 meters. Two devices may be connected over
220m to 500m distances.