Filter
Top Products
7.2 Status/Configuration Report
7-3
Operation and Troubleshooting
Chapter 7
7.2 Status/Configuration Report
The Status/Configuration report is sent as a print job to the printer
when the print server is powered on. For example, the report on the
next page shows the configuration of the print server immediately
before the report is printed. Some printers also allow you to use a
command from the front panel that produce a Status/Configuration
report.
It is strongly recommended that you review this report immediately
after installation and any time the setup has been changed. If the report
does not include a protocol that was configured, check that the
procedure was done properly.
Unit Serial No: 460121 Version: 02.11
Network Address: 00:20:6b:aa:bb:cc
Network Topology:Ethernet Connector: RJ45
Network Speed:10 Megabits
Novell Network Information enabled
Print Server Name: MLT_460121
Password Defined: No
Preferred Server Name: SERVER1
Directory Services Tree: DSTREE1
Directory Services Context: DSCONTEXT1
Frame Type: Novell 802.3
Peer-to-Peer Information enabled
Frame Type: Novell 802.3
Network ID: 3221866504
TCP/IP Network Information enabled
Frame Type: Ethernet II Protocol Address:192.9.200.200
Subnet Mask: 255.255.255.0 Default Gateway: 192.9.200.254
PageWorks.book Page 3 Tuesday, August 4, 1998 11:21 AM