Filter
Top Products
6.3 Running Telnet
6-43
TCP/IP Configuration
Chapter 6
6.3.4 Enable/Disable Network Protocols
To enable network protocols, at the Main menu type
3
and press .
You are given the choice of disabling either NetWare or AppleTalk.
6.3.5 Reset Unit
In order to reset the NIC, type 4 into the main menu and press on
the keyboard.
Note that resetting the NIC initializes the network interface without
effecting the printer interface.
6.3.6 Restore Factory Defaults
When it is necessary to restore factory defaults on your print server,
choose
5
on the Main Menu and press . All NVRAM stored
parameters return to their factory default values. The factory default
values will not take effect until the Telnet program is exited and the
unit is power cycled.
6.3.7 Change Password
When you want to establish a new password, enter
6
from the Main
menu. Type up to eight characters after the New Password query and
press . Retype the same characters at the Retype New Password
query and press . Use the
Save Changes and Exit
option. Once
you have established your password using Change Password, the
password sysadm will be rejected.
Note
• There is a single maintenance access password to the NIC. This pass-
word is used for both Telnet and HTML pages. This password may be
changed from Telnet or from HTML pages (accessed either via MAP
or Web Browser).
Enter
Enter
Enter
Enter
Enter
PageWorks.book Page 43 Tuesday, August 4, 1998 11:21 AM