Filter
Top Products
4.1 Configuring NetWare 2.15 and 3.x
4-4
NetWare Configuration
Chapter 4
4.1.4 Configure the Print Server
Use the following procedure to configure the Print Server’s function:
1. Choose the print server name from the
Print Servers
list and press
.
The
Print Server Information
menu appears.
2. Choose
Print Server Configuration
from the menu and press .
3. Choose
Printer Configuration
from the menu and press .
This displays the
Configured Printers
menu. Since this is a new
Print Server entry, all printers are labeled “Not Installed”.
4. Choose the printer and press . The
Printer 0 Configuration
screen appears with a title of Printer 0, as shown in the following
example.
5. If you choose to, change the default in the Name field on this form
to LASER_PRINTER or something else that helps you identify
the printer. The print server uses this name in its message back to
the users on the Notify list. Select
Name
, enter a name, and then
press .
6. Select
Type
and press . This displays a list of printer types.
Choose
Remote
Other/Unknown
and press . This creates
default entries in the other fields. These defaults are usually opti-
mal, so do not change them without specific knowledge of the
effects.
Enter
Enter
Enter
Enter
Enter
Enter
Enter
PageWorks.book Page 4 Tuesday, August 4, 1998 11:21 AM