Filter
Top Products
8
MCP 5000iE and MCP 7000iE Input/Output/Battery Pack Connections
(Must be performed by Authorized Service Personnel ONLY)
Installation instructions for hardwiring the Input/Output Connections:
1. Crimp M6 ring terminals (part number R14-6 or equivalent) to the appropriate size input
and output cables (see page 9) using the appropiate Crimp tool (part number Crimpers RYO-
14 or equivalent).
Ring Terminal:
Size: M6 (or equivalent)
Part Number: R14-6 (or equivalent)
Manufacturer: Kai Suh Suh Enterprise Company., LTD (or equivalent)
Crimp tool:
Part number: Crimpers RYO-14 (or equivalent)
Manufacturer: Kai Suh Suh Enterprise Company., LTD (or equivalent)
2. Remove the access panel on the rear panel of the UPS.
3. Install the appropriate size strain relief into the input and output access holes.
4. Push the input cable through the strain relief nearest the input terminal block.
5. Connect L1 to the AC Input's "L" terminal, connect L2 to theAC Input's "N" terminal,
connect AC ground to the AC Input's ground terminal. Be sure that all the connections and
the strain relief are tightly secured.
6. Push the output cable through the strain relief nearest the output terminal block.
7. Connect L1 to the AC Output's "L" terminal, connect L2 to the AC Output's "N" terminal,
connect AC ground to the AC Output's ground terminal. Be sure that all the connections and
the strain relief are tightly secured.
8. Reinstall the access panel on the rear panel of the UPS.
9. Now the UPS is ready for the normal start-up procedure.
INSTALLATION
(Must be performed by Authorized Service Personnel ONLY)
Be sure to read the installation placement and all the cautions before installing the UPS. The
MCP-E series UPS has external Battery Pack capability, please observe the following
warning when connecting the Battery Pack(s). WARNING! DO NOT PLUG THE BATTERY
PACK'S CONNECTOR INTO THE UPS's BATTERY CONNECTOR WHILE THE UPS IS TURNED
ON. NOTE: The red connectors/wires are the battery positive(+) and the black connectors/
wires are the battery negative(-) on all MINUTEMAN configurations.
English