Filter
Top Products
- 36 -
Step 4. Specify the desired setting for the SentryII Remote client.
NOTE: This splash screen is only available during the install process. To change these settings after installation, you may edit the
usr/local/sbin/SIIRemote.ini file.
The following is a description of the fields contained on this page:
• Server Address The SentryII Server’s IP address.
• Server Port The API port number of the SentryII Server. (See Server Settings on page 13)
• Username The default is admin. This setting must coincide with the defined SentryII users list. (See
User Management on page 13)
• Password The default is admin. This setting must coincide with the defined SentryII passwords list.
(See User Management on page 13)
• On Battery Shutdown The amount of time in seconds, after the event occurs, before the Remote Client will be
shutdown. If the event is removed before the delay time is reached, the action will be
cancelled. (See UPS and/or Operating System Shutdown on page 20)
• Low Battery Shutdown The amount of time in seconds, after the event occurs, before the Remote Client will be
shutdown. (See UPS and/or Operating System Shutdown on page 20)
NOTE: All Remote clients need to be configured to shutdown before
the SentryII Server.