Filter
Top Products
EN-35
NETWORK menu
IP CONFIG
NETWORK
OK
PJLink
CERTIFICATION
ON
NETWORK RESET
OK
opt.
OK
NETWORK
PASSWORD
PROJECTOR
NAME
IP ADDRESS
NETWORK
IP CONFIG
0. 0. 0. 0
SUBNET MASK
0. 0. 0. 0
MAC ADDRESS
0. 0. 0. 0
XX-XX-XX-XX-XX-XX
DEFAULT
GATEWAY
opt.
DHCP
ON
ITEM SETTING FUNCTION
PROJECTOR NAME xxxxx... Displays PROJECTOR NAME. Displays PROJECTOR NAME in
blank when PROJECTOR NAME is not set. (See page 44.)
SET
Set the name to identify the projector. Enter up to 15 characters
(alphabets or numeric characters). (See page 44.)
NETWORK PASSWORD OK Set the password for Web control or PJLink certification. (See
page 44.)
IP CONFIG OK Select this setting for IP Configuration. (See page 45.)
DHCP
ON
/ OFF
Use this setting when you obtain IP CONFIG automatically by
DHCP server.
IP ADDRESS xxx. xxx. xxx. xxx Displays IP ADDRESS. However, IP ADDRESS is not set as factory
default, and cannot be displayed.
SET
Set IP ADDRESS. When DHCP is set to ON, you cannot change
this setting.
SUBNET MASK xxx. xxx. xxx. xxx Displays SUBNET MASK. However, SUBNET MASK is not set as
factory default, and cannot be displayed.
SET
Set SUBNET MASK. When DHCP is set to ON, you cannot change
this setting.
DEFAULT GATEWAY xxx. xxx. xxx. xxx Displays DEFAULT GATEWAY. However, DEFAULT GATEWAY is
not set as factory default, and cannot be displayed.
SET
Set DEFAULT GATEWAY. When DHCP is set to ON, you cannot
change this setting.
MAC ADDRESS xx-xx-xx-xx-xx-xx Displays MAC ADDRESS.
PJLink CERTIFICATION
ON
/ OFF
Select whether to enable the PJLink certification or not. Select ON
for normal use. (See page 46.)
NETWORK RESET OK Resets the Network Setting. (See page 46.)
Menu operation (continued)