Filter
Top Products
- 1-26 -
ENGLISH
CONTRAST Adjusts to the desired contrast level. X X
BRIGHT Adjusts to the black level of the screen X X
COLOR TEMPERATURE Adjusts the color temperature of the screen image. X X
H-SIZE Adjusts the horizontal size of the image on the screen. X X
H-PHASE Adjusts the horizontal position of the image on the screen. X X
V-SIZE Adjusts the vertical size of the image on the screen. X X
V-POSITION Adjusts the vertical position of the image on the screen. X X
PCC-AMP Straightens the left and right sides of the screen image. X X
PCC-PHASE Adjusts the parallelism of the left and right sides of the X X
screen image.
PCC-CENTER Adjusts the pincushioning near the vertical center of the X X
screen.
TOP-PCC Adjusts the pincushioning at the top corners of the X X
screen.
BOTTOM-PCC Adjusts the pincushioning at the bottom corners of the X X
screen.
PIN-BALANCE Adjusts the curvature of the left and right sides of the X X
screen image.
KEY-BALANCE Adjusts the vertical slant or tilt of the screen image. X X
TOP-BALANCE Adjusts the partiality on the top of the screen image. X X
ROTATION Adjusts the rotation or twist of the picture. X
GEOMETRY RESET Restore to factory preset level.
H-STATIC Adjusts the horizontal alignment of the red, green and X X
blue beams.
V-STATIC Adjusts the vertical alignment of the red, green and blue X X
beams.
MOIRE CANCEL LEVEL Adjusts the moire level on the screen. X X
CORNER PURITY (TL) Adjusts the purity of the top-left corners of the screen. X X
CORNER PURITY (TR) Adjusts the purity of the top-right corners of the screen. X X
CORNER PURITY (BL) Adjusts the purity of the bottom-left corners of the screen. X X
CORNER PURITY (BR) Adjusts the purity of the bottom-right of the screen. X X
CLAMP PULSE POSITION Use this function to eliminate excessive green or white X
background that may occur when both Sync-On-Green
and external sync signals are applied to the monitor.
VIDEO LEVEL Selects video level 1.0V or 0.7V. X
DEGAUSS Eliminates possible color shading or impurity.
POWER-SAVE When adjusting ON, reduces the power consumption of the X
monitor when not in use.
CONTROL LOCK Lock the OSD function to keep the OSD screen you desired. X
OSD POSITION Move the OSD screen position. X
DIAGNOSIS Indicate current Scanning frequency and factory or user
preset timing number.
LANGUAGE Select the language used on OSD screen. X
USB UP-STREAM Select the Upstream port which you want to use. X
USB PORT COMBINATION Selects the combination of the Upstream port and signal X
input connector.
Items
Function
A B C D
A. Press "GEOMETRY RESET" to restore to the factory preset level.
B. Press and buttons together, to restore to the factory preset level.
C. Available to set for each signal timing.
D. Setting does not change by the change of the signal timing.
4.2 Adjustment Items
X: Available