Filter
Top Products
EN-3
ENGLISH
WARNING
• The lens cap is for protecting the lens. If you leave the lens cap on
the lens with the projector turned on, it may be deformed because of
heat build-up. Remove the lens cap when you turn on the projector.
• One of power cords for the U.S., Europe and U.K. is provided appro-
priately.
• This projector uses the power plug of three-pin grounding type. Do
not remove the grounding pin from the power plug. If the power plug
doesn’t fit your wall outlet, ask an electrician to change the wall out-
let.
• In case that the power cord for the U.S. is provided with this projec-
tor, never connect this cord to any outlet or power supply using other
voltages or frequencies than rated. If you want to use a power sup-
ply using other voltage than rated, prepare an appropriate power
cord separately.
• Use 100-240 V AC 50/60 Hz to prevent fire or electric shock.
• Do not place any objects on the power cord or do not place the pro-
jector near heat sources to prevent damage to the power cord. If the
power cord should be damaged, contact your dealer for replace-
ment because it may cause fire or electric shock.
• Do not modify or alter the power cord. If the power cord is modified
or altered, it may cause fire or electric shock.