Mitsubishi Electronics XL30 XL25 SL25 Projector User Manual


 
EN – 7
ENGLISH
Bottom side
3
2
1
1 Adjustment foot (Left/Right)
2 Lamp cover
3 Air inlet grille/Filter cover
Caution:
Do not replace the lamp immediately after using the
projector because the lamp has got extremely hot.
COMPUTER
VIDEO
KEYSTONE
EXPAND
VOLUME
LASER
P in P AUTO POSITION
MENU
R-CLICK
ENTER
MUTE
STILL
16 : 9
SELECT
DVD VIDEO
1
2
1
2
MEMORY
+
1
2
4
5
6
7
8
9
10
11
12
13
3
24
23
22
25
21
20
19
18
17
16
15
14
Remote control
1 Laser aperture
2 Transmission window
3 Wired remote control jack
4 Indicator
5 POWER button
6 KEYSTONE button
7 EXPAND button
8 + , – (VOLUME) buttons
9 Mouse pointer
10 MENU button
1 1 STILL button
12 MUTE button (Audio/Video)
13 Programmable buttons
14 SELECT switch
15 MEMORY button
16 16 : 9 button
17 ENTER button
18 R-CLICK button (For mouse)
19
Direction buttons
20 LASER button
21 AUTO POSITION button
22 PinP button
23 VIDEO 1, 2 button
24 COMPUTER 1, 2 button
25 Left click button (For mouse)
The + and - buttons are used in the KEYSTONE
adjustment and the EXPAND mode in addition to the
volume control.
Pressing the LASER button emits a laser beam. Even
when you keep holding down the LASER button, it is
emitted only one minute. To keep emitting it longer,
press the LASER button again.
You can disable the LASER button to prevent
laser radiation due to misuse of the button.
How to disable the LASER button
While holding the LASER button down, press the }
button three times.
To enable the LASER button, while holding the LASER
button down, press the { button three times.
About the laser beam
This remote control is a Class 2 laser product. (Max. output : 1 mW, Wavelength
: 640-660 nm)
Beam Divergence : 6m distance about 10.0mm x 10.0mm (±6.0mm)
CAUTION :
Pressing the LASER button on the remote control emits a laser beam. Do not
look into the laser beam directly. Do not point the laser beam at anyone.
Looking at the laser beam directly may damage eyesight.
Use of controls or adjustments or procedures other than those specified herein may
result in hazardous radiation exposure.
LASER RADIATION
DO NOT STARE INTO BEAM
WAVE LENGTH: 640-660nm
MAX OUTPUT : 1mW
CLASS 2 LASER PRODUCT
AVOID EXPOSURE-LASER
RADIATION IS EMITTED
FROM THIS APERTURE
CAUTION
CAUTION
Complies with 21 CFR, 1040.10 AND 1040.11
IEC 60825-1:1993+A1:1997