Filter
Top Products
Initial IP Address Configuration
The part of the LCM operation that still requires some explanation is how to edit the
configurable options. In fact, you will only encounter two types of configurable options.
The first type involves entering numbers, such as IP addresses, Netmasks, etc. In this case, you
change the number one digit at a time. The up cursor (U) is used to decrease the highlighted
digit, the down cursor (V) is used to increase the highlighted digit, and the sel button is used
to move to the next digit. When the last digit has been changed, pressing sel simply enters the
number into NPort Server Lite’s memory.
The second type of configurable option is when there are only a small number of options from
which to choose (although only one option will be visible at a time). Consider the PARITY
attribute under PORT SETTING as an example. Follow the tree graph to arrive at the
following PARITY screen. The first option, NONE, is displayed, with a down arrow all the
way to the right. This is an indication that there are other options from which to choose.
P a r i t Y
N O n e
↓
Press the down cursor button once to see Odd as the second option.
P a r i t Y
↑
O d d
↓
Press the down cursor button again to see Even as the third option.
P A R I T Y
↑
E v e n
↓
Press the down cursor button again to see Space as the fourth option.
P A R I T Y
↑
M a r k
↓
Press the down cursor button yet again to see the last option, Space.
P A R I T Y
↑
S p a c e
To choose the desired option, press the select button when the option is showing on the screen.
NPort 5400 Series User’s Manual
3-5