Filter
Top Products
Initial IP Address Configuration
Telnet Console
Depending on how your computer and network are configured, you may find it convenient to use
network access to set up your NPort’s IP address. This can be done using the Telnet program.
1. From the Windows desktop, click on Start and then select Run.
2. Type telnet 192.168.127.254 (use the correct
IP address if different from the default) in the Open
text input box, and then click OK.
3. When the Telnet window opens, if you are prompted
to input the Console password, input the password
and then press Enter.
Note that this page will only appear if the NPort is
password protected.
4. Type 2 to select Network settings, and then press
Enter.
5. Type 1 to select IP address and then press Enter.
NPort 5400 Series User’s Manual
3-7