Filter
Top Products
2-2 Smartio C168H/PCI User’s Manual
Step 7: Connect one of the connection box/cable (also adapter if required)
detailed in the next section.
Step 8: Power on PC and BIOS will automatically set the IRQ and memory
address.
Note ! Each board must occupy one unique IRQ and one unique
memory address, which are assigned by PCI BIOS
automatically. However, you may select the free IRQ number
manually via PC's BIOS setup for PCI slot, but normally this
method is not available for memory. The possible IRQ numbers
are 2, 3, 4, 5, 9, 10, 11, 12, and 15. The possible I/O addresses are
from 0x0000 to 0xFFFF.
Step 9: Proceed with software installation detailed in the next Chapter “Software
Installation”.
Installing Connection Option Opt8x
Connect the Smartio C168H/PCI with the one of the following connection options.
Then you can connect your modem, serial printer, PC COM1/2, bar code reader,
POS, instrument or any other serial devices to the DB25/DB9 connectors. Refer to
Chapter “Connection Option (Opt8x) and Cable Wiring” for RS-232/RS-422/RS-
485 cable wiring.