Filter
Top Products
MGate EIP3000 Series User’s Manual Configuring the EtherNet/IP Gateway
ATTENTION
Use “Default Language” before contacting Moxa Technical Support.
With support for multiple languages, MGate Manager is more user-friendly and accessible.
However, if you need assistance from Moxa Technical Support, please change the language to
“Default Language”. This will prevent any misunderstandings or confusion about MGate Manager
menu items and commands as our engineers assist you.
The default language is English and will only be active for the current MGate Manager session.
When you open MGate Manager again, the language will revert to your original setting.
Connecting to the Unit
MGate Manager needs to connect to the unit before the unit can be configured. There are two
methods to connect to the unit. Broadcast Search is used to find every MGate EIP3000 on the LAN.
Search by IP attempts to connect to a specific unit by IP address, which is useful if the unit is
located outside the LAN or can only be accessed by going through a router.
Broadcast Search
Click Broadcast Search to begin searching the LAN for all MGate EIP3000 units.
5-7