Filter
Top Products
MGate EIP3000 Series User’s Manual Configuring the EtherNet/IP Gateway
Configure IP Address and Other Network Settings
The Network tab is where the unit’s network settings are configured. You can modify the Name,
Network Configuration, IP1 Address, IP2 Address (only for 2-port model) and the default
IP1 address is 192.168.127.254, IP2 address is 192.168.127.253, Netmask and Default
Gateway. You may also select a Password to protect the unit from unauthorized access.
Parameter Value Notes
Name (an alphanumeric string)
You can enter a name to help you identify
the unit, such as the location, function,
etc.
Network Configuration
Static IP, DHCP, BootP, or
DHCP/BootP
Select “Static IP” if you are using a fixed
IP address. Select one of the other options
if the IP address is set dynamically.
IP1 Address
192.168.127.254
(or other 32-bit number)
The IP (Internet Protocol) address
identifies the server on the TCP/IP
network.
IP2 Address
192.168.127.253
(or other 32-bit number)
The IP2 (Internet Protocol) address
identifies the server on the TCP/IP
network.
Netmask
255.255.255.0
(or other 32-bit number)
This identifies the server as belonging to
a Class A, B, or C network.
Gateway
255.255.255.255
(or other 32-bit number)
This is the IP address of the router that
provides network access outside the
server’s LAN.
5-10