Moxa Technologies EIP3000 DF1 Switch User Manual


 
MGate EIP3000 Series User’s Manual Configuring the EtherNet/IP Gateway
If the search is successful, the unit will be listed in MGate Manager. Click the unit to begin
configuration.
ATTENTION
If Search by IP Address fails to locate the MGate EIP3000, the IP address that you entered might
be incorrect. Try doing the search again and re-entering the IP address carefully.
Another possibility is that the MGate EIP3000 is located on the same LAN as your PC, but on a
different subnet. In this case, you can modify your PC’s IP address and or netmask so that it is on
the same subnet as the MGate EIP3000. After your PC and the MGate EIP3000 are on the same
subnet, MGate Manager should be able to find the unit.
Modifying the Configuration
Once your unit is displayed in MGate Manager, select it by clicking on it. The Configuration button
will become available. Click Configuration to open the configuration window.
5-9