Filter
Top Products
UC-7110 Series User’s Manual Introduction
1-11
Additional Functions
Reset Button
Press the “RESET” button continuously for more than 5 seconds to load the factory default
configuration. After loading the factory default, the system will reboot automatically. The System
Ready LED will be blinking for the first 5 seconds. We recommend that you only use this function
if the software is not working properly. To reset the µClinux system software, always use the
software reboot command />reboot to protect the integrity of data in the process of being
transmitted. The reset button is not designed to Hard Reboot UC-7110.
ATTENTION
Resetting to factory default will not format the user directory and erase all of the user's data.
Loading factory default will only load the configuration file. The files in UC-7110 that will be
changed include:
a. /etc/boa.conf
b. /etc/hosts
c. /etc/inittab
d. /etc/password
e. /etc/ramfs.img
f. /etc/resolv.conf
g. /etc/version
h. /etc/group
i. /etc/inetd.conf
j. /etc/motd
k. /etc/protocols
l. /etc/rc
m. /etc/services
o. /home/httpd/boa.conf
p. /home/httpd/index.html
ATTENTION
This function only takes effect when the user directory is working correctly. If the user directory
has crashed, the kernel will automatically load factory default.