Filter
Top Products
UC-7110 Series User’s Manual Introduction
1-2
Overview
The UC-7110 Series of RISC-based Communication Platforms are ideal for your embedded
applications. UC-7110 comes with two RS-232/422/485 serial ports and dual 10/100 Mbps
Ethernet LAN ports to provide users with a versatile communication platform.
UC-7110 uses the ARM9 166 Mhz RISC CPU. Unlike the X86 CPU, which uses a CISC design,
the ARM9’s RISC design architecture and modern semiconductor technology provide UC-7110
with a powerful computing engine and communication functions, but without generating too much
heat. The built-in 8 MB NOR Flash ROM and 16 MB SDRAM give you enough storage capacity
to run applications on UC-7110. The dual LAN ports built into the ARM9 make UC-7110 an ideal
communication platform for some of the more simple data acquisition and protocol conversion
applications, and the two RS-232/422/485 serial ports allow you to connect a variety of different
types of serial device.
The pre-installed µClinux operating system provides an open software operating system for
software program development. This means that software written for desktop PCs is easily ported
to UC-7110 by using a GNU cross complier, so that you will not need to spend time modifying
existing software code. The Operating System, device drivers, and your own software can all be
stored in UC-7110’s Flash memory.
Package Checklist
The UC-7110 Series model currently available is:
UC-7110-LX RISC-based Universal Communicator with 2 Serial Ports, Dual Ethernet, µClinux
OS
UC-7110 Series products are shipped with the following items:
y 1 UC-7110
y UC-7110 Quick Installation Guide
y Universal Communicator Documentation & Software CD-ROM
y Ethernet cross-over cable: RJ45 to RJ45, 100 cm
y Console port cable
CBL-4PINDB9F-100: 4-pin header to DB9 (Female) cable, 100 cm
y Power Adaptor
y Product Warranty Booklet
NOTE: Notify your sales representative if any of the above items is missing or damaged.
Product Features
UC-7110 Series products have the following features:
y ARM9 166 MHz Processor
y On-board 16 MB RAM, 8 MB Flash ROM
y Two RS-232/422/485 serial ports
y Dual 10/100 Mbps Ethernet
y µClinux-Ready communication platform
y DIN-Rail or wall mounting installation
y Robust fanless design