MPI Technologies 2100 Printer User Manual


 
*/
// FORMDEF=A10110,CHARS=GT15 /* JOB SEPARATOR FORMDEF
*/
//DSHDR OUTPUT PAGEDEF=V06483, /* DS SEPARATOR PAGEDEF
*/
// FORMDEF=A10120,CHARS=GT15 /* DS SEPARATOR FORMDEF
*/
//MSGDS OUTPUT PAGEDEF=A06462, /* MESSAGE DATASET PAGEDEF
*/
// FORMDEF=A10110 /* MESSAGE DATASET FORMDEF
*/
//********************************************************************
//*
//* THIS PROC. IS TO BE USED FOR 300 DPI DEVICES
//* -----------
//********************************************************************
//FONT01 DD DSN=SYS1.FONTLIBBB,DISP=SHR /* FONTS - 300 DPI */
// DD DSN=SYS1.FONT300,DISP=SHR /* SYSTEM FONTS - 300 DPI */
//*-------------------------------------------------------------------
//PSEG01 DD DSN=SYS1.PSEGLIB,DISP=SHR /* SYSTEM PAGE SEGMENTS */
//*-------------------------------------------------------------------
//OLAY01 DD DSN=SYS1.OVERLIB,DISP=SHR /* SYSTEM MEDIUM OVERLAYS */
//*-------------------------------------------------------------------
//PDEF01 DD DSN=SYS2.PDEFLIB,DISP=SHR /* SYSTEM PAGEDEFS */
// DD DSN=SYS1.PDEFLIB,DISP=SHR /* SYSTEM PAGEDEFS */
//*-------------------------------------------------------------------
//FDEF01 DD DSN=SYS2.FDEFLIB,DISP=SHR /* SYSTEM FORMDEFS */
// DD DSN=SYS1.FDEFLIB,DISP=SHR /* SYSTEM FORMDEFS */
//********************************************************************
//* STANDARD PRINTDEV */
//********************************************************************
//PRT420 CNTL
//PRT420 PRINTDEV FONTDD=*.FONT01, /* FONT LIBRARY DD */
// OVLYDD=*.OLAY01, /* OVERLAY LIBRARY DD */
// PSEGDD=*.PSEG01, /* SEGMENT LIBRARY DD */
// PDEFDD=*.PDEF01, /* PAGEDEF LIBRARY DD */
// FDEFDD=*.FDEF01, /* FORMDEF LIBRARY DD */
// JOBHDR=*.JOBHDR, /* JOB HEADER SEPARATOR OUTPUT */
// JOBTRLR=*.JOBTLR, /* JOB TRAILER SEPARATOR OUTPUT*/
// DSHDR=*.DSHDR, /* DATA SET HEADER SEPERATOR */
// MESSAGE=*.MSGDS, /* MESSAGE DATA SET OUTPUT */
// PAGEDEF=A06462, /* DEVICE PAGEDEF DEFAULT */
// FORMDEF=A10110, /* DEVICE FORMDEF DEFAULT */
// CHARS=(GT10, /* DEVICE */
// GT12,GT15,GT10), /* DEFAULT FONT SET */
// PIMSG=YES, /* ACCUMULATE DATA SET MESSAGES*/
// DATACK=BLOCK, /* REPORT ALL DATA-CHECK ERRORS*/
// TRACE=NO, /* CREATE INTERNAL TRACE */
// FAILURE=WCONNECT, /* ACTION ON PRINTER FAILURE */
// TIMEOUT=REDRIVE, /* PSF ACTION ON TIMEOUT */
// DISCINTV=0, /* DISCONNECT INTERVAL IN SECS.*/
// MGMTMODE=IMMED, /* ACTIVATE PRINTER AT STARTUP */
// IPADDR=‘192.0.110.21’ /* IP ADDRESS */
// PORTNO=5001 (9100) /* IP ADDRESS
*/
//PRT420 ENDCNTL
Using IP address 192.0.110.21 and port number 5001
The IP address of the PrintServer (IPDS) should be programmed in the IPADDR
statement. The PORTNO 5001 is the default port number of the first IPDS port on
27