MPI Technologies 2100 Printer User Manual


 
0x086000: Numeric representation precision check
0x08C100: Position check
Specification Check - IO Image Exceptions
0x050001: Invalid IO-Image self-def. field code
0x050003: Invalid IO-Image self-def. field len.
0x050004: Invalid IO-Image self-def. field val.
0x05700F: IO - Begin Segment out of sequence.
0x05710F: IO - End segment out of sequence
0x05910F: IO - Begin Image Content out of seq.
0x05920F: Image Data self-def. field out of seq
0x05930F: End Image Content out of sequence
0x059401: Inconsistent Image Size Parameter value and Image Data
0x05940F: Image Size Parameter missing
0x059410: Image Size Parameter value unsupp.
0x059411: Image Size cannot be determined
0x05950F: Image Encoding Parameter out of seq.
0x059510: Image Encoding Parameter value unsupp.
0x059511: IO-image decompression error.
0x05960F: Image Data Elem. Size Par. our of seq
0x059610: Image Data Elem. Size Par. val. unsup.
0x05970F: Image Look Up Table ID out of seq.
0x059710: Image Look Up Table ID Par. unsupp.
0x05A902: IO data outside the Image Pres. Space
Specification Check - Bar Code Exceptions
0x040300: Invalid bar code type
0x040400: Unsupported font - local ID or font not available
0x040500: Invalid or unsupported bar code colour
0x040600: Invalid module width
0x040700: Invalid element height
0x040800: Invalid height multiplier
0x040900: Invalid wide-to-narrow ratio
0x040A00: Invalid symbol reference point
0x040B00: Invalid bar code modifier
0x040C00: Invalid bar code data length
0x040E00: Check-digit calculation exception
0x041000: Invalid HRI location
0x041100: Attempt to print outside block
Specification Check - Graphics Exceptions
0x030001: Unsupported graphics command code
0x030002: Reserved byte or invalid attr. set
0x030003: Incorrect drawing order length
0x03000C: Segment prolog exception
0x03000E: Unsupported attribute value
0x030021: Invalid or unsupported default
0x033400: Character angle value not supported
0x033E00: Invalid End Prolog
31