Filter
Top Products
7 Error Messages
Overview of IPDS NACK’s that can be returned to the system.
7.1 Supported IPDS NACK's:
Command Reject Exceptions
0x800100: Invalid IPDS Command Code
0x800200: Invalid IPDS Command Sequence
0x800400: Data received after ARQ
0x80E000: Invalid IPDS Command Length
Equipment check with intervention-Required Exception
(MPI Tech LinkCom/HostCom only)
0x501000: Printer hardware exception
0x50F200: Print overrun
0x50F500: Image generator exception
0x50F600: Offset stacker exception
0x50F700: Duplex media source exception
0x50F800: Input media source exception
Intervention-Required Exceptions
0x400000: Printer Not Ready
0x400100: Printer Out of Paper
0x400200: Printer exit tray full
0x400400: Printer out of toner
0x400500: Empty fuser oil supply
0x400600: Invalid media
0x403100: Paper length check
0x403300: Paper width check
0x40E000: Paper jam not cleared
0x40E100: Out of paper (secondary input)
0x40E200: Transport requires corrective action
0x40E300: Fuser requires corrective action
0x40E500: Paper jam recovery needed
0x40E600: Door open
0x40E700: Paper specification check
Equipment check exception
0x10F100: Permanent hardware exception
0x10F200: Print overrun
0x10F300: Magnet settings changed
0x10F400: Serializer parity exception
0x10F500: Image generator exception
0x10FA00: Media size sensor error
Data-Check Exceptions
0x082100: Undefined Character
0x082900: Double-byte coded font section is not activated or is invalid
30