Filter
Top Products
EMULATION
Defines the type of IPDS printer to emulate.
Range:
3812
3816
4028
Default:
4028
DEFAULT CODEPAGE
Defines which codepage to use as printer default.
Range:
1..65534 (0xFFFE). Validated when the ppd line opens.
Default:
500
REPORT MARGINS TO SYSTEM
Defines whether the margins should be reported in the OPC reply or not. If not,
the entire page is reported as the printable area.
Range:
YES, NO.
Default:
NO
VPA CHECK
Defines which margins should be used to determine the existence of a VPA
exception condition, which must be reported to the system.
Range:
MARGINS
PHYSICAL PAGE
IPDS LOGICAL PAGE
NONE.
Default:
PHYSICAL PAGE
Note: VPA CHECK=MARGINS will be changed to PHYSICAL PAGE if the margins
are not reported to the system.
PRINT OFFSET X
Defines X-offset to move the output print position. The value is defined in 300 dpi
dots.
Range:
-999..999
Default:
0
PRINT OFFSET Y
Defines Y-offset to move the output print position. The value is defined in 300 dpi
dots.
Range:
-999..999
Default:
0
ADD MARGINS
Defines whether the printable area margins should be added to the IPDS LPP
(Logical Page Position) or not.
7