Filter
Top Products
Chapter 5 – Configuration Using Web Management Software
Multi-Tech Systems, Inc. RouteFinder SOHO RF820/RF820-AP & RF830/RF830-AP User Guide (S000399E) 46
Network Setup > Wireless LAN > WLAN Client Filter
Network Setup > Wireless LAN > WLAN Client Filter
Screen Note: This screen applies to the RF820-AP and RF830-AP only.
WLAN Client Filter
The WLAN Client Filter is used to Allow/Reject the wireless station's association with the Access Point.
Access Control Status
Check this box to enable Access Control on the WLAN.
Default Action
Choices are:
ALLOW – Select this to allow the WLAN Client based on the Access Control list.
REJECT – Select this to deny the WLAN Client based on the Access Control list.
Access Control List
Device Name
Enter the name of the device that will be allowed access to the WLAN.
Mac Address
Enter Mac Address of the device that will be allowed access to the WLAN.
Add Button
Click the Add button after the Device Name and Mac Address have been entered. They will then
display at the bottom of the screen.
Add/Edit/Delete
The maximum number of devices allowed on the Access Control List is 20.
You can Edit and Delete clients from the list at the bottom of the screen.