Filter
Top Products
Index
Multi-Tech Systems, Inc. SocketModem MT5634SMIxx Reference Guide (S000263C) 135
Page Transfer Status - +FPS.............................................82
Page Width Format Conversion - +FWDFC.....................90
Parameter Commands.......................................................72
parity, setting ..............................................................20, 27
Pause time for comma - S8, setting...................................28
PCM Upstream Ignore command - +PIG= .......................23
Phase C Data Format - +FBO...........................................87
Phase C Received EOL Alignment - +FEA......................87
polling...............................................................................65
Post Page Message Response - +FET...............................69
Post-Page Message Release command.............................62
Produce DTMF and Tone Generation in Voice Mode
command +VTS=.......................................................108
Protocol Result Code command - \V ................................16
Pulse Dial Make-to-Break Ratio Selection command - &P
......................................................................................13
Pulse Dialing command - P...............................................10
Q
Quick Connect..................................................................25
Quick Connect Control command - +PQC=.....................25
R
Rate S37, maximum data..................................................29
Read Register Value command Sr? ..................................11
Receive Page Transfer Status response - +FPS.................68
Receive Quality Thresholds - +FRQ.................................84
Remote configuration .....................................................129
Escape character.........................................................129
Escape character - S9 ...................................................28
Remote Escape AT Command..........................................21
Remote escape character, changing................................129
Remote ID Responses - +FTI, +FCI, +FPI.......................66
remote IDs.......................................................................66
Remote Polling Indication Response - +FPO ...................65
Repeat Last command - A/ .................................................8
Report Addressing or Password Strings Responses - +FSA,
+FPA, +FPW................................................................67
Report DIS/DCS/DTC Frame Information responses -
+FCS, +FIS, +FTC.......................................................65
Report Event Reporting and Masking Capabilities
command - +VEM=?..................................................118
Report Frequency Support command - +VTS=?.............109
Report Manufacturer’s ID command - +FMI?................107
Report Modem Flow Control Assert and Deassert Points
command - +VBT=?...................................................119
Report Non-Standard Negotiation Frames responses -,
+FNF, +FNS, +FNC.....................................................66
Report Product ID command - +FMM?..........................107
Report Received HDLC Frames response ....................93
Report Remote ID responses..........................................66
Report Transmit HDLC Frames response.........................93
Report Version Level command - +FMR?......................107
Report Voice Compression Method command - +VSM=?
....................................................................................115
Request Manufacturer ID - +FMI.....................................60
Request Manufacturer Identification command................60
Request Model ID - +FMM? ............................................60
Request Model Identification command............................60
Request Revision ID - +FMR? .........................................60
Request Revision Identification command........................60
Request to Poll - +FSP......................................................78
Resetting the modem ..................................................11, 12
responses...........................................................................64
Result Code Format command - V ...................................11
Result Code Options command - W .................................11
Result Code Selection command - X................................ 11
Result codes .......................................................................5
Result Codes ....................................................................31
Result Codes Enable/Disable command - Q..................... 10
Return Online to Data Mode command - O......................10
Ring Priority vs. AT Command Priority Command $RP . 18
Rings counted - S1 ........................................................... 28
Rings S0, setting number of............................................. 28
ROM Checksum...............................................................10
S
Select Analog Source/Destination command - +VLS=.. 111
Select Default Beep Tone Duration Timer (DTMF/Tone
Generation Duration) command +VTD=................... 115
Select DTE/DCE Interface Rate (Turn Off Autobaud)
command - +VPR=.................................................... 120
select Fax Class 1 command - +FCLASS=1 .................... 37
select Fax Class 1.0 command - +FCLASS=1.0 .............. 37
Select Flow Control Method command - +FLO=........... 107
Select Maximum MNP Block Size command - \A...........14
Select Modem Operating Mode command +FCLASS=. 105
Select Stored Configuration command &W.....................14
Select Voice Compression Method command +VSM=..114
Serial Port Baud Rate command - $SB ............................18
Service Class Available - +FCLASS................................59
Service Class Capabilities command ...............................59
Service Class Selection - +FCLASS=<value>................. 60
Service Class Selection command .................................... 60
Session Message Report Responses................................. 93
Session Message Reporting - +FBU................................. 79
Session Termination - +FKS............................................ 63
Session Termination command.........................................63
Set 11-bit Parity command - #P.................................. 20, 27
Set Current Time & Date.................................................. 91
Set DTE/DCE Inactivity Timer command - VIT= ......... 110
Set Modem Flow Control Assert and Deassert Points
command - +VBT=.................................................... 119
Set Register Value command - Sr=.................................. 11
Set Ring Back Goes Away Timer command - VRA=.... 112
Set Ring Back Never Appeared Timer command - +VRN=
................................................................................... 112
Set Silence Detection Sensitivity command +VSD=...... 113
Set the Gain for Received Voice Samples command -
+VGR= ...................................................................... 110
Set the Volume for Transmitted Voice Samples command -
+VGT= ...................................................................... 110
Setup password............................................................... 129
Setup password, changing.............................................. 129
sleep mode S89 ................................................................ 30
Speaker Mode command..................................................10
Speed
Maximum S37 ............................................................. 29
Speed conversion (data buffer)......................................... 13
S-registers
S2 – Escape Sequence.................................................. 28
S-Registers ....................................................................... 28
reading......................................................................... 11
S0 – Sets Number of Rings.......................................... 28
S1 – Counts Rings........................................................28
S10 – Carrier Loss Disconnect Time ........................... 28
S108 – 56K Operation Digital Loss.............................30
S11 – Dialing Tones ....................................................28
S28 – V.34 Modulation................................................28
S3 – Carriage Return.................................................... 28
S30 – Inactivity Timer................................................. 28
S35 – V.25 Calling Tone ............................................. 28
S36 – Error Control...................................................... 28