Filter
Top Products
Chapter 3 – Fax Class 2 Commands
Multi-Tech Systems, Inc. SocketModem MT5634SMIxx Reference Guide (S000263C) 79
Capability to Receive
Class 2.1 +FCR
Write syntax: +FCR=<value>
Values: 0, 1
Default: 0
+FCR=0 The modem will not receive message data; also, the modem will not be
able to poll a remote device. This can be used when the host has
insufficient storage, or if the modem does not have a Phase C (V.27ter,
V.29) demodulator. The modem can send and can be polled for a file.
+FCR=1 The modem can receive message data.
+FCR is sampled in ITU T.30 Phase B and Phase D.
Class 2 +FCR
Write syntax: +FCR=<value>
Values: 0, 1
Default: 0
The Class 2 parameter is identical to the Class 2.1 parameter.
Session Message Reporting
Class 2.1 +FBU
Write syntax: +FBU=<value>
Valid values: 0, 1
Default value: 0
+FBU=0 Disables HDLC frame reporting.
+FBU=1 Enables the modem to report the contents of Phase B and Phase D HDLC
frames to the host, as they are sent and received, in addition to other
responses. Reports use the +FHT: and +FHR: responses, described in the
Session Message Report Responses section of this chapter.
Class 2 +FBUG
Write syntax: +FBUG=<value>
Values: 0, 1
Default: 0
The Class 2 parameter is identical to the Class 2.1 parameter except for the name.