Filter
Top Products
Chapter 3 – Fax Class 2 Commands
Multi-Tech Systems, Inc. SocketModem MT5634SMIxx Reference Guide (S000263C) 66
Report Remote ID
Class 2.1 +FTI:, +FCI:, +FPI:
Syntax: +FTI:”<TSI ID string>” Transmit Station ID
Syntax: +FCI:”<CSI ID string>” Called Station ID
Syntax: +FPI:”<CIG ID string>” Polling Station ID
These responses report the received remote ID string, if any. They are generated in
execution of the Originate, Answer, +FDT, and +FDR commands.
The modem reports the characters in the ID string in reversed time order from the
order received from the remote station. For example, if the following ID FIF character
string were received (hexadecimal values):
<20><20><20><20><20><31><30><39><38><20><37><36><35><20><34><33>
<32><20><31><2B>
The result would be:
<CR><LF>+FCI:"+1 234 567 8901 "<CR><LF>
Class 2 +FTSI:, +FCSI:, +FCIG:
Syntax: +FTSI:”<TSI ID string>” Transmit Station ID
Syntax: +FCSI:”<CSI ID string>” Called Station ID
Syntax: +FCIG:”<CIG ID string>” Polling Station ID
The Class 2 responses are essentially the same as the Class 2.1 responses.
Report Non-Standard Negotiation Frames
Class 2.1 +FNF:, +FNS:, +FNC:
Syntax: +FNF:<NSF FIF string> Non-Standard Facilities
Syntax: +FNS:<NSS FIF string> Non-Standard Setup
Syntax: +FNC:<NSC FIF string> Non-Standard Commands
These responses report received non-standard negotiation frames, one response per
frame. These responses are generated in execution of the Originate, Answer, +FDT,
and +FDR commands.
The NSF Facsimile Information Field (FIF) frame octets are presented in hex
notation, and are separated by spaces. Flags and zero bits are removed. Frame octets
are reported in the order received. For each frame octet the LSB is the first bit sent or
received.
Class 2 +FNSF:, +FNSS:, +FNSC:
Syntax: +FNSF:<NSF FIF string> Non-Standard Facilities
Syntax: +FNSS:<NSS FIF string> Non-Standard Setup
Syntax: +FNSC:<NSC FIF string> Non-Standard Commands
The Class 2 responses are essentially the same as the Class 2.1 responses.