Filter
Top Products
MultiVOIP User Guide Technical Configuration (Analog)
224
Supplementary Services Definitions (cont’d)
Field Name Values Description
Call Name
Identification
Enable
Enables CNI function. Call Name
Identification is not the same as Caller
ID. When enabled on a given voip
unit currently being controlled by the
MultiVOIP GUI (the ‘home voip’),
Call Name Identification sends an
identifier and status information to
the administrator of the remote voip
involved in the call. The feature
operates on a channel-by-channel
basis (each channel can have a
separate identifier).
If the home voip is originating the
call, only the Calling Party field is
applicable. If the home voip is
receiving the call, then the Alerting
Party, Busy Party, and Connected
Party fields are the only applicable
fields (and any or all of these could be
enabled for a given voip channel). The
status information confirms back to
the originator that the callee (the
home voip) is either busy, or ringing,
or that the intended call has been
completed and is currently connected.
The identifier and status information
are made available to the remote voip
unit and appear in the Caller ID field
of its Statistics – Call Progress screen.
(This is how MultiVOIP units handle
CNI messages; in other voip brands,
H.450 may be implemented
differently and then the message
presentation may vary.)