Filter
Top Products
MultiVOIP User Guide T1 PhoneBook Configuration
285
The table below describes all fields in the PhoneBook Configuration
screen.
PhoneBook Configuration Parameter Definitions
Field Name Values Description
Gateway
Name
Y/N This field allows you to specify a name for
this MultiVOIP. When placing a call, this
name is sent to the remote MVP3000 for
display in Call Progress listings, Logs, etc.
Q.931 Parameters
Use Fast Start Y/N Enables the H.323 Fast Start procedure.
May need to be enabled/disabled for
compatibility with third-party VOIP
gateways.
Call Signalling
Port
port
number
Default: 1720 (H.323)
GateKeeper RAS
Parameters
IP Address
IP address of the GateKeeper.
Port Number Well-known port number for GateKeepers.
Must match port number of GateKeeper,
1719.
Gateway
Prefix
This number becomes registered with the
GateKeeper. Call requests sent to the
gatekeeper and preceded by this prefix will
be routed to the VOIP gateway.
Gatekeeper
Name
alpha-
numeric
string
Optional. The name of the GateKeeper with
which this MultiVOIP is trying to register.
H.323 ID The H.323 ID is used to register this
particular MultiVOIP with the GateKeeper.
H.323 ID is an alias entry sent to the
GateKeeper, made of alpha-numeric
characters. For NetMeeting endpoints,
numbers are preferred over letters. The
H.323 ID identifies the IP calling sequence
that the GateKeeper must ‘dial’ to contact
the remote VOIP.