Filter
Top Products
Operation and Maintenance MultiVOIP User Guide
364
Setting a Password (Windows GUI)
After a user name has been designated and a password has been set,
that password is required to gain access to any functionality of the
MultiVOIP software. Only one user name and password can be
assigned to a voip unit. The user name will be required when
communicating with the MultiVOIP via the web browser GUI.
NOTE: Record your user name and password in a safe place. If
the password is lost, forgotten, or unretrievable, the user
must contact MultiTech Tech Support in order to resume
use of the MultiVOIP unit.
1. The MultiVoip configuration program must be off when invoking
the Set Password command. If it is on, the command will not work.
2. To invoke the Set Password command, go to Start | Programs |
MVP____ x.xx | Set Password.
3. You will be prompted to confirm that you want to establish a
password, which will entail rebooting the MultiVOIP (which is done
automatically).
Click OK to proceed with establishing a password.