Filter
Top Products
Overview MultiVOIP User Guide
16
E1 Front Panel LEDs
Because the MVP3010 and MVP30-60 both use a common main circuit
card or motherboard, the LED indicators are the same for both.
Figure 1-4. MultiVOIP MVP3010 Chassis
Active LEDs. The MVP3010 front panel has two sets of identical LEDs.
In the MVP3010 as shipped (that is, without an expansion card), the
left-hand set of LEDs is functional whereas the right-hand set is not.
When the MVP3010 has been upgraded with an MVP30-60 kit, the
right-hand set of LEDs will also become active.
E1 LED Descriptions
MVP3010 Front Panel LED Definitions
MVP3010 Front Panel LED Definitions
LED NAME DESCRIPTION
Power Indicates presence of power.
Boot
After power up, the Boot LED will be on for about 10
seconds while the MVP3010 is booting.
RCV Receive. Lights when receiving data on Ethernet
port.
XMT Transmit. Lights when transmitting data on
Ethernet port.
LNK Link. When lit, VOIP “sees” the hub or network
via the Ethernet connection.
COL Collision. Lit when data collisions occur.